Philips CCB 252AT owner manual Recording, To stop recording, press the STOP/ button Tape Speeds

Page 29

Read and follow the steps below to record a TV program.

1

Place a tape with its record tab intact (see page five) in the TV/VCR. The power will come on. Or, if the tape is already in the TV/VCR, press the POWER button to turn on the TV/VCR, if necessary.

2

Press the SPEED button until the desired tape speed appears on the TV/VCR screen. Details about tape speed are given below.

3

Use the CH(annel) m/n button or the Number buttons to select the channel to be recorded. (Channels cannot be changed

during recording.)

4

Press the REC(ord)/OTR button once to start recording. The REC(ord) light will glow.

If there is not a tape in the TV/VCR, NO CASSETTE flashes on the screen briefly.

If the tape does not have a record tab, PROTECTED CASSETTE CANNOT RECORD flashes on the screen briefly. The TV/VCR will eject the tape. Insert another tape.

5

To pause the recording (for example, during commercials), press the PAUSE/STILL button. The REC(ord) light will flash.

To resume recording, press the PAUSE/STILL button again or the REC(ord)/OTR button. The REC(ord) light will glow.

6

To stop recording, press the STOP/button.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. During playback, the VCR selects the tape speed automatically. When recording, you can change the tape speed using the SPEED button. You cannot record in LP speed.

 

Cassette type / Playback Time

Tape Speed

T160

T120

T60

SP(Standard Play)

2 hrs.

2

hrs.

1 hr.

 

40 mins.

 

 

 

 

LP(Long Play)

5 hrs.

4

hrs.

2 hrs.

(playback only)

20 mins.

 

 

 

 

 

 

 

 

SLP(Super Long Play)

8 hrs.

6

hrs.

3 hrs.

 

 

 

 

 

 

Recording 29

1

POWER

 

SLEEP/WAKE UP

 

6

 

PLAY

 

 

REW

 

 

F.FWD

 

 

STOP

 

 

MENU

STATUS/EXIT

CLEAR

3

 

1

2

3

 

 

4

5

6

CH.

 

7

8

9

 

 

2

 

0

ALT. CH

VOL.

 

 

 

 

SPEED MEMORY

PAUSE/STILL

 

REC/OTR

TRACKING

MUTE

 

4

 

 

 

 

5

Helpful Hints

You cannot record one channel while watching another.

Recording options are on pages 30-36.

You cannot record if DEFEAT RECORDING is set to ON. (REC DEFEATED will flash on the screen.) Details are on page 36.

If you pause a recording for more than five minutes, the TV/VCR will switch to Stop mode automatically to protect the video cassette tape from damage.

You can change the tape speed with the SPEED button while a recording is in progress, but some

distortion may appear on the tape.

Image 29 Contents
CCB252AT For Customer Use Dear Philips product ownerSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Using the Remote Control Putting Batteries in the Remote ControlTV/VCR Maintenance Recording PreventionRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Crooked Pin Straight Pin Hooking Up the TV/VCR cont’dTurning On the TV/VCR You cannot set up channels if you are using a Cable BoxPress the Menu button Language SelectionAutomatic Channel Setup Press the PLAY/ o button or the STOP/ p button to select Adding/Deleting ChannelsCable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Automatic PBS Channel Selection Setting the Clock cont’dWait for the TV/VCR to find Manual PBS Channel Selection Select SET PBS CH. MANUAL. Then, press the F.FWD/B Press the PLAY/ button or the STOP/ button toButton Use the Number buttons to select your PBS stationDaylight-Savings Time Time Zone Front Panel ANTenna Jack AC Power CordRear Panel Remote Control Buttons REWind/ Button STOP/ ButtonSTATUS/EXIT Button Menu ButtonAdjusting the Picture Controls More brilliant Adjusting the Picture Controls cont’dDecrease Increase If you select Status ON, then select Counter only OFF On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status OFFReminder Press the PLAY/ button or the STOP/ button to selectVHS Quasi Play Back Sqpb PlayingTo stop recording, press the STOP/ button Tape Speeds RecordingOTR One-Touch RecordingDifferent brands of equipment may operate differently Rerecording Tape DuplicationDaily Timer RecordingTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Defeat Recording Repeat Play Insert a tape in the TV/VCR Press the Menu button B Repeat PlayPress the STATUS/EXIT button to remove the menu. A-B Repeat Play cont’dPress the STATUS/EXIT button. The real-time counter will Real-Time Counter MemoryForward and Reverse Searching SP/LP/SLP Playback OptionsSuper High Speed Searching LP/SLP Viewing a Still PictureSmartLock Example Specific Ratings SmartLock cont’dTo change the access code, follow these steps Rating Explanations Ground Blue BackgroundPress the SLEEP/WAKE UP button Sleep TimerTimer Sleep Wake UP TV on ON-TIME Wake Up TimerInstructions continue on Closed CaptionExample MenuHalf-screen text Closed Caption cont’dVolume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d TV/VCR Combination Limited WarrantyMemory IndexPage Supplied Accessories
Related manuals
Manual 60 pages 8.84 Kb