Unpacking, Service Centers | Philips LTC 3962, LTC 3924 specs

SAFETY PRECAUTIONS

CAUTION	ATTENTION
RISK OF ELECTRIC SHOCK	RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN	NE PAS OUVRIR

This label may appear on the rear of the unit due to space limitations.

The lightning flash with an arrowhead sym- bol, within an equilateral triangle, is intended to alert the user to the presence of uninsu- lated “dangerous voltage” within the prod- uct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to pres- ence of important operating and mainten- ance (servicing) instructions in the literature accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

To prevent fire or shock hazard, do not expose units not specifically designed for outdoor use to rain or moisture.

Attention: Installation should be performed by qualified service personnel only in ac- cordance with the National Electrical Code or applicable local codes.

Power Disconnect: Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all units.

External Power Supplies

Use Only the Recommended Power Supplies. Power supplies must comply with the requirements of the latest version of IEC 65/VDE 0860. Substitutions may damage the unit or cause a fire or shock hazard.

220-240 V, 50 Hz Power Cords

220-240 V, 50 Hz power cords, input and out- put, must comply with the latest versions of IEC Publication 227 or IEC Publication 245.

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

SENSITIVE

DEVICES

WARNING: Electrostatic-sensitive device. Use proper CMOS/MOSFET handling precautions to avoid electrostatic discharge.

NOTE: Grounded wrist straps must be worn and proper ESD safety precautions observed when handling the electrostatic-sensitive printed circuit boards.

1 UNPACKING

Unpack carefully. This is electronic equipment and should be handled carefully.

Check to ensure that the following items are in- cluded:

• Model number of unit.

If an item appears to have been damaged in ship- ment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Philips Communication, Security & Imaging Sales Representative or Customer Service.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

2 SERVICE

If the unit ever needs repair service, the customer should contact the nearest Philips Communication, Security & Imaging Service Center for return autho- rization and shipping instructions.

Service Centers

U.S.A. & Canada: 800-326-3270 (717-735-6300)

Mexico & Central America: 52-5-564-2726

Europe & Middle East: 011-32-1-440-0711

South America: 54-11-4956-0837

Asia Pacific Region: 011-65-481-4422

For additional information, see www.philipscsi.com.

PHILIPS LTC3924/62 (E) QR34071

LTC 3924, LTC 3962 specifications

Philips LTC 3962 and LTC 3924 are two prominent LED drivers designed to enhance lighting efficiency and performance in various applications. These devices stand out for their innovative technology and key features, making them ideal choices for both residential and commercial lighting solutions.

The Philips LTC 3962 is a high-performance LED driver that offers a wide input voltage range, catering to various lighting designs. It supports constant current output, ensuring stable lighting performance over time and aiding in superior color consistency across LED arrays. With its compact design, the LTC 3962 is well-suited for applications requiring space-efficient solutions. Notably, it features built-in thermal protection and supports dimming options, allowing users to adjust brightness levels according to their preferences and energy-saving needs.

On the other hand, the Philips LTC 3924 is designed for higher power applications, enabling it to drive larger LED arrays effectively. It boasts advanced power management technologies, which enhance energy efficiency by minimizing losses during operation. The LTC 3924 supports dimmable LED drivers, while its robust architecture accommodates a wide variety of LED types, ensuring flexibility for design engineers. One of the standout characteristics of the LTC 3924 is its ability to interface seamlessly with smart lighting systems, paving the way for enhanced connectivity and control.

Both the LTC 3962 and LTC 3924 integrate advanced features such as over-voltage, under-voltage, and over-current protection, ensuring reliable performance in varying conditions. They also come with built-in diagnostic features, which allow for easy troubleshooting and maintenance, thus extending the lifespan of the LED lighting systems they power.

In summary, Philips LTC 3962 and LTC 3924 are exceptional LED drivers, engineered with innovative technologies and features that cater to the evolving needs of modern lighting. Their emphasis on efficiency, flexibility, and reliability makes them ideal candidates for a wide range of applications, ensuring optimal performance in any setting. Whether for smart homes, commercial spaces, or industrial environments, these LED drivers represent a significant advancement in lighting technology, driving the future of energy-efficient illumination.