8 Hookups With a Cable Box
This connection allows you to view any channel. You must select channels at the Cable Box.
1.Connect the Cable signal to the IN Jack on the Cable Box.
IN
OUT
|
| ANT OUT |
|
| CH3 |
| AUDIO | CH4 |
DC 13.2V | OUTPUT | ANT IN |
| ||
| VIDEO |
|
3.Use a second RF coaxial cable to con- nect the ANT(enna) OUT jack on the VCP to the TV’s ANTENNA IN Jack.
75‰ ANT / CABLE
ANTENNA IN Jack
Back of TV (example only)
2.Use the RF coaxial cable (supplied) to connect the OUT Jack on the Cable Box to the ANT(enna) IN Jack on the VCP.
Watching TV with the VCP Off
1
Set the TV to the Cable Box output channel (channel 3 or 4).
2
Select the channel you want to watch at the Cable Box. You can not select channels at the TV.
Playing a Tape
1
Set the TV to channel 3 or 4, whichever channel the CH3/CH4 switch on the VCP is set to.
2
Press the PLAY button to play the tape.