J
-
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE Q583P
MODULATORON
CHANNEL/FREQ. FREQ
TO EXIT
PRESS MENU
6Confirm the new modulator frequency with OK.
7Leave the on-screen menu with the MENU button
Switching off the modulator |
|
If you have connected the video recorder to the TV set |
|
with a scart cable, you can switch off the modulator | FOR |
when there is interference with the picture or sound | |
(see below). | EXPERTS |
Switching the modulator on / off
If picture and sound interference cannot be removed by optimising the modulator, the integral modulator can be switched off.Warning: this is only possible if you have connected the video recorder to the TV set with a scart cable. It is not possible to operate with the modulator switched off without a scart cable.
1Switch the video recorder on and make sure there is no cassette in the video recorder
2Press simultaneously the EJECT button Jon the front of the video recorder and the button PROGRAMME - until the display shows the modulator frequency (e.g. “M583” or “CH35”)
3The display shows “M ON”. The video recor- der will now transmit a test image on this frequency
4Use =P- or ;P+ to select the option
“MODULATOR”
5Use P or Q to select the setting “ON” (Modulator on) or “OFF” (Modulator off)
6Confirm with OK. The screen will show the message “STORED”. The display shows “MOFF”
7Leave the on-screen menu with the MENU button
ENGLISH | 59 | SWITCHING THE MODULATOR ON / OFF |
|