30 Timer Recording
Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. You can program up to eight timer recordings. For each one, the VCR will turn itself on, record, and turn itself off automatically.
If you are using a Cable Box, timer recordings may be pro- grammed differently. Read pages
●Channels are programmed.
●The clock is set.
●There is a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).
●The VCR light appears on the display panel of the VCR. If it does not, press the VCR/TV button once.
Complete each step within 60 seconds of completing the previous step. If you don’t, start again at step 1.
1
Press the VCR button, then the MENU button to bring up
the main menu display.
TO SELECT PUSH NO. SHOWN
1PROGRAM
2VCR SET UP
3TUNER SET UP
4SET CLOCK
TO END PUSH EXIT
2
Press the Number 1 button on the remote control to select
PROGRAM.
TO SELECT PUSH NO. SHOWN
1ONCE
2DAILY
3WEEKLY
4PROGRAM REVIEW
TO END PUSH EXIT
1
2
3
| VCR | TV | CABLE | |
POWER | /DSS | |||
|
| |||
| 2 | 3 | VCR/TV | |
1 |
| |||
4 | 5 | 6 |
| |
|
|
| CHANNEL | |
7 | 8 | 9 |
| |
VCR PLUS+ |
|
|
| |
/ENTER |
|
|
|
0+100
SPEED | TIME SEARCH | MUTE | VOLUME |
| PLAY |
| |
– REW |
| F.FWD + | |
| STOP |
| |
REC/OTR | MEMORY | SLOW | PAUSE/STILL |
MENU | STATUS/EXIT | CLEAR | EJECT |
3
Select a once, daily or weekly recording.
●Press the Number 1 button to select ONCE. The VCR will record a TV program on any day you choose, up to 12 months away.
●Press the Number 2 button to select DAILY. The VCR will record every day from Monday to Friday – starting at the same time and for the same length of time.
●Press the Number 3 button to select WEEKLY. The VCR will record on the same day, at the same time, and for the same length of time every week (for example, every Tuesday from 2- 3 p.m.).
Daily | DAILY PROGRAM | |
Recording | PROGRAM | |
| ||
Menu | SELECT PROGRAM NUMBER | |
Screen | ||
TO END PUSH EXIT |
Helpful Hints
•If you need to make corrections while programming a timer record- ing, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information.
•If the end of the tape is reached during a timer recording, recording will stop. The VCR will eject the tape and turn itself off.