Philips VRA641AT owner manual On-Screen Status Displays, If on Screen Mode is set to on or Counter

On-Screen Status Displays 25

An on-screen status display, which includes the current VCR operation and other information (see illustration), will appear when you press the EXIT/STATUS button or certain function buttons. The contents of the status display will vary.

ON SCREEN MODE ON:

•Whenever you press the PLAY 8 button or the STOP 9 button to stop playback, some of the contents of the status display will appear for five seconds.

ON SCREEN MODE COUNTER:

•The real-time counter will appear on the screen during normal tape playback and when playback is stopped. Whenever you press the PLAY 8 button or the STOP 9 button to stop playback, some of the contents of the status display will appear for five seconds. After five seconds, only the counter will remain on the screen.

ON SCREEN MODE OFF:

•No status display will appear when you press function buttons or the EXIT/STATUS button.

To select a status display mode, follow these steps.

1

Press the VCR button, then press the MENU button.

SELECT , 9 CHOOSE >/OK

Sound program available

Channel

Current VCR

operationTime

STOP				12:00 PM
STEREO				CH. 12
SAP
		SHARP
REMAINING
TIME		0:59
SLP		0:00:00 HIFI
	Tape		Sound program
speed			selected

Real-time counter

Tape time remaining

SmartPicture setting

→VCR SET UP TUNER SET UP INITIAL SET UP

TO END PUSH EXIT

2

Press the PLAY 8 or STOP 9 button to select VCR SET UP, then press the FF :/OK button.

SELECT , 9	CHOOSE >/OK
→ ON SCREEN MODE		ON
BLUE BACKGROUND		ON
TIMER REC SPEED		MANUAL
VIDEO STABILIZER		OFF
AUDIO OUT		HIFI
STEREO/SAP		STEREO

TO END PUSH EXIT

3

Press the PLAY 8 or STOP 9 button to select ON

SCREEN MODE, if necessary.

4

Press the FF :/OK button repeatedly so that ON,

COUNTER, or OFF appears beside ON SCREEN MODE.

5

Press the EXIT/STATUS button.

Helpful Hints

•If ON SCREEN MODE is set to ON or COUNTER:

•You may bring up the status display at any time by pressing the EXIT/STATUS button. (The exception is during Slow, Search, or Still mode.) The display will appear for about five seconds.

•Channel numbers (when tuned) will appear for a few seconds.

•When tape playback is stopped, press the EXIT/STATUS button repeatedly to see the current time, real-time counter, or current channel number on the display panel. During tape playback, press the EXIT/STATUS button repeatedly to see the current time or real-time counter on the display panel. The channel will not appear.

•Depending on the type of tape used, the tape time remaining may not appear right away, or may not be correct. Also, “– – : – –” may appear, or the display may flash.