My TV has several scart sockets. Which one should I use?
Select that scart socket which is suited for the video output as well as for the video input.
My TV offers me a selection menu for the scart socket.
Select 'TV' as a connection source of this scart socket.
6.If the connection was properly made and your TV was automatically switched to the programme number for the scart socket, you will see the following picture:
PLEASE CONNECT AERIAL OR
CABLE TO THE VCR
THEN...
PUSH P+ KEY
OR...
FOR PLAY ONLY - PUSH PLAY
Then, read the paragraph 'Preparation for use' in the chapter 'Installing your video recorder'.
My screen is empty
Many TVs are switched to the programme num- ber for the scart socket by way of a control sig- nal sent through the scart cable.
If the TV does not automatically switch to the scart socket programme number, manually change to the corresponding programme num- ber on your TV (see your TV's operating instruc- tions).
Connecting without a scart cable
Have the following cables ready: an aerial cable.
1.Switch off your TV. |
|
|
2.Remove the aerial |
|
|
cable plug from the | AV1 (TV) | AERIAL |
aerial input socket of |
|
|
the TV. Insert it into | AERIAL |
|
RF OUT |
| |
|
| |
the AERIAL at the |
|
|
back of the video |
|
|
recorder. |
|
|
3.Insert one end of the |
|
|
supplied aerial cable |
|
|
into the RF OUT at | AV1 (TV) |
|
| RF OUT | |
the back of the video | AERIAL |
|
RF OUT |
| |
|
|
recorder and the other end into the aerial input socket at
the back of the TV.
4.Insert AC cable into the wall socket.
5.Switch on your TV and select the programme number used for video playback on your TV set (see your TV's operating instructions).
6.Select this programme number and manually start the TV's channel search as if you wanted to save a new TV channel until the next screen appears.
PLEASE CONNECT AERIAL OR
CABLE TO THE VCR
THEN...
PUSH P+ KEY
OR...
FOR PLAY ONLY - PUSH PLAY
I do not see the picture
*Check the cable connections.
*Repeat the channel search on your TV.
7.Save this programme number setting on your TV for video recorder operation.
You can find more details in chapter 'Preparation for use.
Programme number for video recorder oper- ation
You have now saved a programme number for use by your video recorder as you would a reg- ular TV channel. This programme number must now be used in future for video recorder play- back ('video recorder' TV channel).
Connecting additional devices
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the socket AV2(DECODER).
AV1 (TV)
AV2 (DECODER)
AV2(DECODER)
AERIAL
RF OUT
3 | EN |
|