Yamaha AX-497, AX-397 owner manual Handling the remote control

Page 10

CONTROLS AND FUNCTIONS

Installing batteries in the remote control

13

2

Using the remote control

The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the front panel of this unit during operation.

1

Open the battery compartment cover.

 

 

2

Insert two supplied batteries

 

(AAA, R03, UM-4) according to the polarity

30 30

+

–

∞

Approximately 6 m (19.7 ft)

markings (+ and –) on the inside of the

battery compartment.

3 Close the cover back.

■Notes on batteries

•Change all of the batteries if you notice the following conditions; the operation range of the remote control decreases, the indicator does not flash or its light becomes dim.

•Use AAA, R03, UM-4 batteries.

•Make sure that the polarities are correct. See the illustration inside the battery compartment.

•Remove the batteries if the remote control is not used for an extended period of time.

•Do not use old batteries together with new ones.

•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

•We strongly recommend using alkaline batteries.

•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

•Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.

■Handling the remote control

•The area between the remote control and this unit must be clear of large obstacles.

•Do not spill water or other liquids on the remote control.

•Do not drop the remote control.

•Do not leave or store the remote control in the following types of conditions:

–places of high humidity, such as near a bath

–places of high temperature, such as near a heater or a stove

–places of extremely low temperatures

–dusty places

•Do not expose the remote control sensor to strong lighting, in particular, an inverter type fluorescent lamp; otherwise, the remote control may not work properly. If necessary, position this unit away from direct lighting.

6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents AX-497/AX-397 Important Safety Instructions Serial NoFCC Information for US customers For Canadian Customers Pour LES Consommateurs CanadiensContents AX-497 FeaturesSupplied Accessories AX-397Controls and Functions PowerStandby indicator Front panelOpening and closing the front panel Door Controlling this unit Remote controlControlling other components Handling the remote control Rear panel Impedance Selector switchAsia and General models only Turntable Tuner Tape deck, etc Connecting speakers and other componentsConnections VCR, etcConnecting the banana plug Connecting the power supply cord Connecting the AC power supply cordPlaying and Recording Press Power on the front panel inward to the on positionIndicator of the selected input source lights up Playing a sourceStandby indicator lights up Adjusting the tonal quality Recording a source to a tape or an MD Begin recording on the tape deck or the MD recorder Troubleshooting GeneralRemote control Control Section SpecificationsPower Section GeneralWG02700

AX-397, AX-497 specifications

The Yamaha AX-497 and AX-397 are two notable integrated amplifiers from Yamaha's renowned hi-fi audio lineup, designed to deliver exceptional sound quality and performance for audiophiles and music enthusiasts alike. While both models share a strong foundation, they exhibit distinct features and technologies that cater to different listening preferences.

The Yamaha AX-497 is the more advanced of the two, boasting a power output of 80 watts per channel at 8 ohms, which provides ample power for driving various speakers effectively. The AX-497 utilizes Yamaha's proprietary ToP-ART (Total Purity Audio Reproduction Technology) design, which focuses on preventing signal degradation and ensuring a clean, natural sound. This model features a discrete amplifier configuration, providing lower distortion levels and a more dynamic soundstage.

One of the standout features of the AX-497 is its comprehensive tone control system. Users can finely adjust the bass, treble, and balance, allowing for personalized sound tailored to individual preferences and room acoustics. Additionally, the AX-497 includes a direct input for bypassing tone controls during critical listening sessions, effectively providing an uncolored sound reproduction.

On the other hand, the Yamaha AX-397 offers a slightly reduced power output of 60 watts per channel at 8 ohms, making it suitable for smaller speaker systems and listening environments. Despite this lower output, the AX-397 still maintains an impressive sound quality, thanks to a similar ToP-ART design that ensures purity in audio reproduction.

The AX-397 is equipped with a high-quality phono stage, allowing for a seamless connection with turntables, which is becoming increasingly popular among vinyl enthusiasts. Additionally, it features a simple yet elegant user interface with easy-to-use controls for volume, input selection, and tone adjustments.

Both models utilize a robust build quality, reflecting Yamaha's commitment to durability and longevity. The sleek design of the amplifiers complements any audio setup, adding a touch of sophistication.

In summary, the Yamaha AX-497 and AX-397 integrated amplifiers are distinguished by their power outputs, features, and target users. The AX-497 is ideal for those seeking higher power and extensive control over sound, while the AX-397 suits casual listeners who appreciate quality sound in a more compact form. Regardless of the choice, both amplifiers exemplify Yamaha's dedication to delivering superior audio experiences.
Top Page Image Contents