seat and cross bar |
|
|
|
assembly |
|
|
|
| b |
|
|
|
| b |
|
|
| c |
|
|
| c |
|
kneepad side | a | a | carriage bolt |
support assembly |
| ||
|
|
|
flat washer
base assembly
lock washer acorn nut
7.Fasten the seat and cross bar assembly, kneepad side support assembly, and base assembly together with carriage bolts:
a.Attach the kneepad side support assembly to the base assembly. Fit the square shoulder of each carriage bolt in the square hole at inside of base bracket, in- stalling each carriage bolt through the base and kneepad side support assem-
bly as shown above. Install the flat washer, lock washer, and acorn nut on the end of each carriage bolt as shown above. Tighten the two nuts securely using the provided wrench.
b. Attach the seat and cross bar assembly to the kneepad side support assembly. Fit the square shoulder of each carriage bolt in the square hole at inside of kneepad side support assembly, installing each carriage bolt through the knee- pad side support assembly and seat and cross bar assembly as shown above. Install the flat washer, lock washer, and acorn nut on the end of each car- riage bolt as shown above. Tighten the two nuts securely using the provided wrench.
c.Tighten the four nuts that attach the kneepad assembly to the two side sup- port
WARNING: Before operating the Stand Assist, ensure that all components are prop- erly and securely assembled and that all fasteners are secure.
WARNING: Before operating the Stand Assist, read the operation instructions.
10 |
|