Introduction, Mounting, UL requirements | Extron electronic CVC 200

Introduction

The CVC 200 Component Video Converter converts all SMPTE standard component video formats to RGBS or RGBHV video. The CVC 200 can also strip sync-on-green (SOG) from RGsB video. The converter outputs converted RGBS or RGBHV video on BNC connectors. Figure 1 shows a typical CVC 200 application.

					LCD Projector
					or
			UT
			OUTP
	FORM	AT
	FORM
INPU	T
INPU
Extron					Video Monitor
CVC 200
Video Converter
HDTV			or	DVD	Large Screen
HDTV				DVD	Rear Projector

Set Top Box

Figure 1 — Typical CVC 200 application

The component video input formats include DVD, Betacam® video, and HDTV component video. The RGsB video input can be computer video or NTSC/PAL video.

Mounting

The CVC 200 can be rack mounted using one side of a 1U Universal Rack Shelf (part #60-190-01) or 1U Basic Rack Shelf (part #60-604-01).

UL requirements

The following Underwriters Laboratories (UL) requirements pertain to the installation of the CVC into a rack.

1. Elevated operating ambient temperature — If the equipment installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature. Therefore, install the CVC in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.

2. Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is not compromised.

1	CVC 200 • Installation

Mounting

3. Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

Mounting instructions

Rack mount the CVC 200 as follows:

1.	Remove the feet from the CVC, if they were previously installed.
2.	Mount the CVC 200 on the rack shelf, using two 4-40 x 3/16”
	screws in opposite corners (under the shelf) to secure the CVC to
	the shelf (figure 2).

#10-32 Screw w/ Nylon Captive Cap Washer

False front panel uses 2 front holes.

C	(2) 4-40 x 3/16" Screws
VC
200

Use 2 mounting holes on opposite corners.

Figure 2 — Rack mounting the CVC 200

CVC 200 • Installation

CVC 200 specifications

The Extron CVC 200 is an innovative component in the realm of video conferencing technology, designed to cater to the needs of modern organizations looking to enhance their communication capabilities. This cutting-edge device provides users with seamless connectivity and exceptional video quality, making it an essential tool for any conferencing setup.

One of the key features of the CVC 200 is its ability to handle a wide variety of video inputs and outputs. It supports 4K resolution at 60 Hz, ensuring that users experience crystal-clear visuals during their meetings. This high resolution is crucial for displaying detailed content, such as presentations or intricate graphics, ensuring that every participant can engage with the materials being shared.

The CVC 200 is equipped with advanced encoding and decoding technologies that optimize video performance. This ensures that video signals are transmitted with minimal latency, providing a smooth visual experience. The device is also compatible with popular video conferencing platforms, allowing for easy integration within existing systems, which is particularly important for a diverse array of industries.

Another defining characteristic of the CVC 200 is its scalability. Organizations can easily expand their video conferencing capabilities as their needs grow, thanks to the CVC 200’s modular design. This adaptability allows for seamless integration into various setups, whether they be small huddle rooms or large conference spaces.

The user-friendly interface of the CVC 200 enhances its appeal for businesses. It allows users to easily navigate settings and control various functions without the steep learning curve associated with more complex systems. Moreover, its robust security features ensure that sensitive information shared during meetings remains protected from unauthorized access.

Furthermore, the CVC 200 offers flexible control options, enabling users to manage the system through various methods, including remote control, touch panels, or even mobile devices. This versatility increases user satisfaction by providing multiple ways to interact with the system.

In summary, the Extron CVC 200 is a powerful video conferencing solution that combines high-quality video performance, scalability, and user-friendly controls. With its advanced encoding technologies and compatibility with popular platforms, the CVC 200 is an ideal choice for organizations looking to optimize their communication strategies in the digital age.