Peavey Q operation manual Output Level LED Meter, Equalizer Section

Page 5

EQUALIZATION PROCESS

Always begin the equalization process with all sliders at their center-detent (flat response) positions. Lower each fader until the feedback frequency is found. Lower the faders in small amounts to avoid adversely affecting sound quality. Likewise, excessive boosting of a frequency may result in feedback.

EXERCISE CAUTION WHEN ATTEMPTING TO BOOST FREQUENCIES BELOW SPEAKER SYSTEM TRANSDUCER CUT-OFF.

Typical sound reinforcement enclosures are not designed for 20 Hz performance, and transducer damage could result from “over-boosting” low frequencies. Excessive boost at very low frequencies could also limit overall system headroom. Engaging the 40 Hz low cut filter is the best way to avoid these problems.

NOTE: Superb tonality, absence of feedback and great-sounding systems may not be attainable regardless of the equalizer used; all system components must be of high quality and designed for the application. No amount of equalization will correct poor acoustics, poor microphone/speaker arrangement or the response curve of a poor loudspeaker.

Front Panel

42

1

6

5

3

FEATURES AND CONTROLS

(1)OUTPUT LEVEL LED METER

This LED array indicates output level from –12 dB to +12 dB.

(2)GAIN

This calibrated, detented control regulates overall gain of the EQUALIZER section (3). Total gain throughout the signal chain can be maintained by recovering lost signal gain at this point. The equalization process may result in noticeable signal loss. To compensate for this loss, engage the BYPASS (5) switch and compare the signal level with that of the equalized level. Increase the GAIN control until the equalized level approximates that of the bypassed level. Let your ears be your guide.

(3)EQUALIZER SECTION

These calibrated, detented controls adjust the amount of cut or boost within their respective

5

Image 5
Contents Page Page Important Safety Instructions Series Equalizers FeaturesEqualizer Section Output Level LED MeterIEC Mains Connector PowerLOW CUT Filter BypassXLR Input XLR OutputTRS Balanced Input Both Models Q2151/Q1311Series Peavey Electronics Corporation Limited Warranty

Q specifications

Peavey Q is a series of professional audio mixers designed to meet the demands of both live sound and studio applications. Combining innovative technology with user-friendly features, the Peavey Q series emphasizes versatility and sound quality, making it a popular choice among audio engineers, musicians, and sound professionals.

One of the standout features of the Peavey Q series is its intuitive layout, which facilitates ease of use during live performances and studio recordings. The mixers are equipped with a variety of input channels, including both mono and stereo options, allowing for the connection of diverse audio sources such as microphones, instruments, and playback devices. Each channel comes with a dedicated 3-band EQ, which enables precise tonal adjustment to tailor the sound to the specific environment or performance requirements.

A prominent technology in the Peavey Q series is the inclusion of USB connectivity, allowing for seamless integration with digital audio workstations (DAWs). This feature enhances the mixers' functionality for recording purposes, as it enables multi-channel audio streaming to and from a computer or other digital devices.

Additionally, the Peavey Q mixers boast built-in digital effects, providing users with a range of reverb, delay, and modulation options to enhance their sound. This eliminates the need for external effects processors and simplifies the setup for live shows or recording sessions.

The robust construction of the Peavey Q series ensures durability and reliability, making these mixers suitable for touring and rigorous use in various environments. The mixers are designed to withstand the rigors of transport while maintaining optimal performance.

Another significant characteristic of the Peavey Q series is its affordability, making high-quality audio mixing accessible to a broader range of users, including small venues, churches, and independent artists.

Overall, the Peavey Q series represents a well-balanced combination of innovative technology, essential features, and sturdy design. Whether utilized in a live setting or in the studio, the Peavey Q mixers deliver impressive performance and ease of use, ensuring that sound professionals can focus on what matters most: creating and delivering exceptional audio experiences.