Module Installation, Input Wiring, Muting | Bogen BAL2S specification

Module Installation

1. Turn off all power to the unit.

2.Make all necessary jumper selections.

3.Position module in front of desired module bay opening, making sure that the module is right-side up.

4.Slide module on to card guide rails. Make sure that both the top and bottom guides are engaged.

5.Push the module in to the bay until the face- plate contacts the unit’s chassis.

6.Use the two screws included to secure the module to the unit.

WARNING:

Turn off power to unit and make all jumper selections before installing module in unit.

Input Wiring

Balanced Connection

Use this wiring when the source equipment supplies a balanced, 3-wire output signal.

For either input, connect the shield wire of the source sig- nal to the “G” terminal of the input. If the “+” signal lead of the source can be identified, connect it to the plus “+” ter- minal of the input. If the source lead polarity cannot be identified, connect either of the hot leads to the plus “+” terminal. Connect the remaining lead to the minus “-” ter- minal of the input.

Note: If polarity of the output signal versus the input signal is important, then it may be necessary to reverse input lead connections to correct the “out-of-phase” signal problem.

Unbalanced Connection

Use this wiring when the source equipment supplies an unbalanced, 2-wire output signal.

For either input, short the input minus “-” terminals to the input’s ground “G” terminal. Apply the source’s shield to the “G” terminal and the source’s hot lead to the input’s plus “+” terminal.

Features

Ducking (Duck)

Controls the level of the out- put signal from the module when it has been requested to mute its output. The range is adjustable from no reduction in level to full (~50 dB) muting of the output signal.

Balanced Inputs

Balanced, 3-wire input, each input dedicated to each audio bus. See input wiring section for information on balanced and unbalanced connections.

Muting

This module can be set so that it is muted by higher priority mod- ules.When that is the case, it is always the lowest priority module. It can also be set so that it never mutes.

Channel Gain

This module provides for channel gains of either 0 dB (X1) of gain or 18 dB (X8) of gain. Separate switches service each channel inde- pendently.

BAL2S specifications

The Bogen BAL2S is an advanced two-way speaker designed for a variety of commercial audio applications. It is renowned for its durability, performance, and versatility, making it an ideal choice for environments such as schools, offices, retail spaces, and public address systems. This speaker model excels at delivering clear, full-range sound, which is essential for effective communication and engagement in any setting.

One of the standout features of the BAL2S is its robust construction. The speaker is built using high-quality materials that ensure longevity and withstand the rigors of everyday use. Its weather-resistant design also makes it suitable for outdoor installations, as it can handle exposure to various environmental conditions without compromising sound quality.

The BAL2S utilizes a 6.5-inch polypropylene woofer and a 1-inch soft dome tweeter, which together provide a wide frequency response, enabling it to reproduce everything from deep, rich bass to crisp, clear highs. This full-range capability makes the BAL2S ideal for music playback and vocal reinforcement. The speaker's power handling capacity allows it to operate efficiently across a wide range of input signals, making it a reliable choice for different audio sources.

In terms of technology, the Bogen BAL2S features a built-in transformer with multiple power taps. This allows for easy integration into 70V or 100V distributed audio systems, simplifying installation and providing flexibility in installation configurations. The transformer design ensures consistent sound levels across long distances, making it especially beneficial for larger venues or installations where speakers are spaced apart.

The speaker also includes adjustable mounting options, providing the flexibility to position it in a way that best suits the acoustic characteristics of the environment. Whether wall-mounted or suspended from the ceiling, the BAL2S can deliver excellent sound coverage, ensuring that audio is evenly distributed throughout the space.

With its combination of quality construction, high-performance components, and versatile installation options, the Bogen BAL2S stands out as a leading choice for professional audio solutions. It is engineered to meet the demands of modern audio environments, making it a reliable partner for sound system designers and installers alike. Users can trust the BAL2S to deliver exceptional audio quality, making communication and entertainment a seamless experience.