Assembly
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact
Front Tube | Rear Tubes |
|
Front
Tube 
1Frame
• Lift the rear and front tubes to open the frame.
Base Tube
Base Tube
Foot Foot
2 | TOP VIEW |
|
•Fit a foot onto the end of each base tube, as shown. Hint: Make sure the feet curve outward.
BOTTOM
VIEW
3 | 2 - M4.5 x 12 mm |
Screws |
•Insert an M4.5 x 12 mm screw into the hole in the underside of each foot and tighten with a Phillips screwdriver.
Upper Frame Tube Hubs
Rear Frame Tubes
4
•Position the upper frame tubes so that the hubs face each other.
•Fit the upper frame tubes into the rear frame tubes.
Hint: The upper frame tubes are designed to fit one way. If they do not seem to fit, turn them around and try again.
5