Using the Trays, To change shoulder belt slots

Securing Your Child

To change shoulder belt slots:

•From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots.

Shoulder

Portion

Using the Trays

WARNING

Prevent serious injury or death from falls or sliding out.

The child should be secured in the high chair at all times by the restraining system, either in the recline, semi-recline or upright position. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair.

Base Tray

Armrest

•From the front of the high chair, pull the shoulder portion of the waist/shoulder belts out and then fit them back through the desired shoulder belt slots in the headrest pad, seat pad and the seat back. Pull on the belts to be sure they are secure in the seat back.

•Fit the base tray onto the seat armrests. Push down until the base tray "snaps" into place.

Hint: Before use, thorougly wash all parts (the trays) that may contact food.