Assembly
Step 10
Jbar
Support Leg
Important: have two people complete steps
Assemble crossbar to Jbars and support leg in the order shown. Note: a Jbar with safety lever should be assembled on the right side (side with non locking wheels) and a Jbar without lever on the left side (side with locking wheels). The support leg is always assembled closest to the wheelbase. You may need to lower table slightly to line up the bolt holes. Do not fully tighten the bolts until both ends are assembled.
2 Required
m8x45
Support Leg
Jbar
Wheelbase
A
D
Support Leg
Jbar
G
2 Required | 2 Required | 2 Required |
dia 16x8 | m26x19x6 | dia 30x8 |
BC
Jbar
EF
16