USA
Assembly of the toy vehicle
■The toy vehicle must be assembled carefully by an adult person. Study the assembly instruc- tions carefully before beginning work. Assemble the vehicle in the exact sequence shown by the letters in the diagrams. This is essential for the safe function and use of the tricycle.
■Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.
■Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!
■Bolt all the parts together loosely at first, and check that they have been assembled cor- rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to final- ly tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.
■The grips can be pushed onto the handlebars more easily if they are first soaked in warm water.
■Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary.
■For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).
■When ordering spare parts, always state the full item number,
Example order: item #
Important: spare part prices do not include fastening material; if fastening material (bolts,
nuts, washers etc.)is required, this should be clearly stated on the order by adding the words „with fastening material“.
KETTLER® International Inc., 1355 London Bridge Road · Virginia Beach VA 23453 For parts or service ONLY call
parts@kettlerusa.com
call (866)
The manufacturer reserves the right to make changes reflecting product or other technical advances. The content of these instructions is accurate at the date of printing.
4