Assembly
PUSH
Seat 
Frame
Straight Axle Assembly
3
Bottom View
1
•Fit the seat onto the frame.
•Push firmly near the back end of the seat to "snap" it into place.
Bushing
(Grooved Side Down)
Rear
Wheel
(Indented
Side Down)
Wheel Hub
(Flat Side Down)
•Turn the frame upside down.
•Insert the straight axle assembly rear of the frame.
Straight Axle
Bushing
(Smooth Side First)
4
through the holes in the
Wheel
(Flat Side First)
Wheel Hub
(Pointed End First)
Straight | Straight | |
Axle | ||
Axle | ||
|
Cap Nut
2
•Place one end of the straight axle into the cap nut. Tap the end of the straight axle with a hammer. Make sure the cap nut is securely attached to the straight axle.
•Slide a wheel hub, flat side down, onto the straight axle.
•Slide a rear wheel, indented side down, onto the straight axle.
•Slide a bushing, grooved side down, onto the straight axle.
•Turn the assembly upright.
•Slide a bushing, smooth side first, onto the end of the straight axle.
•Slide a wheel, flat side first, onto the end of the straight axle.
•Slide a wheel hub, pointed end first, onto the end of the straight axle.
3