SETUP
Install or Replace Battery
1.Remove the battery compartment cover.
2.Pull the plastic tab below the battery (if applicable) to remove it and discard the tab.
3.Insert 1 x 3V CR2032 lithium battery into the battery compartment, as shown. Follow the polarity
4.Replace the battery cover.
2 Remove
Plastic Tab
CR2032+
| CR2032 | 1 Remove |
| + | Battery Cover |
|
| |
3 | Install Battery |
|
| 1 x 3V CR2032 |
|
| lithium battery |
|
Set the Measurement Units
While you are weighing an item, press the Unit Conversion button, located on the bottom of the scale, to toggle between grams/milliliters (g/ml) and pounds/ounces (lb/ oz).
4