Iinstructions, For Battery Power

IINSTRUCTIONS

You can power both the camera and the video receiver with batteries or an AC

4 adapter. Each unit requires 6 AA batteries for battery operation. Both units have rechargeable circuits, therefore, when using the AC adapters, make sure you only

have rechargeable batteries or no batteries at all in the battery compartment. The bat- tery life of the rechargeable batteries is approximately 3-3 1/2 hours in the video receiver and 5 hours in the camera. For long periods of non-use, remove all batteries from their compartments and unplug the AC adapters.

FOR BATTERY POWER

1.Remove the battery cover with a flathead screwdriver. The battery cover is on the bottom of the camera and on the back of the monitor.

2.Insert 6 AA alkaline or rechargeable batteries into either unit or both units matching Positive (+) to Positive and Negative (-) to Negative. For complete battery power you will need a total of 12 AA batteries (6 rechargeable batteries are included with your monitor).

3.Replace the battery cover with a screwdriver.

4.Charge the rechargeable batteries 10-12 hours before using the monitor on battery power for the first time. This can be done while operating the monitor on AC power or when the monitor is off. Charge the batteries by plugging the adapter directly into the monitor or into the monitor stand.

Camera

Video Monitor