2.If you have not entered a security code, you can enter it here. If you have previously entered a security code, your current security code displays.
The default security code is set to 123456. We recommend that you change this code to something you will remember. You will need the code to access your video from a remote device such as a smart phone or PC.
3.Tap on the Change Code field. A keyboard screen displays.
4.Enter your security code. You can switch the keyboard from alphabetical characters to numbers/symbols and back by tapping the field to the left of the space bar. Tap Return. The Security Code screen displays again.
You must enter a security code to monitor your video from a PC or other device.
5.Tap OK on the system reboot prompt. The Network Setup screen displays.
6.Turn your Lullaboo monitor off then back on for the security code change to take effect.
28