WARNINGS Never the lift Melody Bouncer using the toy bar.
Attaching the Canopy
1.To install the canopy place the notch in the clamp of the canopy holder into the hole on the frame. (Located above the waist belt).
2.Open the canopy by pulling on the visor with one hand until fully opened.
3.Before folding the Melody Bouncer, grasp the visor and push down to close the canopy.
Installing the Toy Bar
Canopy
Holder
Clamp
Frame
To remove the Canopy
Grasp the canopy holders on each side, one at a time, and pull out from the frame.
Toy bar | WARNING |
| |
holderToy bar |
|
Never lift the Melody Bouncer using the toy bar.
Clamp
Seat cushion
Frame
To install the toy bar, place the notch in the clamp of the toy bar holder into the hole on the front tube (located above the seat).
Note:
Clamp must be positioned behind the toy bar holder in order to insert into the front tube.
Using and Adjusting the Seat Belt
Avoid serious injury from falling or sliding out.
WARNING Always use seat belt.
Place the crotch belt between baby’s legs and fasten the waist belt buckles together.
After adjusting the waist belt, make sure it is fastened securely.
To adjust the waist belt, loosen the slack on both sides of each buckle.
CAUTION
Even when the seat belt is fastened, be careful not to let the child slip out or stand.
- 2 -
COMBI International Corporation • 199 Easy St. • Carol Stream, IL 60188 •