Lexicon MC-12 manual Sub L/R, SUB Xover, Lfe, When a custom speaker setup is selected

Setup Lexicon

SETTING CROSSOVER POINTS (continued)

SUB L/R MONO, STEREO, NONE

SETUP SPEAKERS SET CROSSOVERS CUSTOM SETUP SUB L/R

Configures the Main Zone audio output connectors labeled SUBWOOFER L/R for a speaker setup that includes one, two, or no subwoofer(s).

When a custom speaker setup is selected, the SUB L/R parameter opens the SUBWOOFERS L/R menu, to select a configuration for the SUBWOOFER L/R output connectors.

•Select MONO if the speaker setup includes one subwoofer. The MC-12 sends low frequency front, center, and surround channel signals to the SUBWOOFER L/R output connectors.

•Select STEREO if the speaker setup includes two subwoofers. The MC-12 sends low frequency front left, center, and surround left channel signals to the SUBWOOFER L output connector and low frequency front right, center, and surround right channel signals to the SUBWOOFER R output connector.

•Select NONE if the speaker setup does not include a subwoofer. The MC-12 redirects low frequency signals to the speakers with the lowest crossover points – unless the 5.1a BYPASS listening mode is activated. In this instance, configure the speaker setup with the associated DVD-A/SACD player to redirect low frequency signals.

SETUP SPEAKERS SET CROSSOVERS THX SETUP

When a THX speaker setup is selected, the SUBWOOFER L/R output connectors are configured for a speaker setup that includes one subwoofer, and the SUB L/R parameter cannot be adjusted.

SUB XOVER FULL, 30 to 120Hz, THX 80Hz, NONE

SETUP SPEAKERS SET CROSSOVERS CUSTOM SETUP SUB XOVER

Assigns a crossover point for the Main Zone audio output connectors labeled SUBWOOFER L/R when a custom speaker setup is selected. Opens the SUB XOVER menu to select a crossover point for the SUBWOOFER L/R output connectors.

Select FULL to send a full-range signal to the subwoofer(s). Otherwise, select the crossover point equal to the lowest crossover point of the other speakers.

SETUP SPEAKERS SET CROSSOVERS THX SETUP

When a THX speaker setup is selected, a THX 80Hz crossover point is applied to the SUBWOOFER L/R output connectors, and the SUB L/R parameter cannot be adjusted.

LFE ON, OFF

SETUP SPEAKERS SET CROSSOVERS CUSTOM SETUP LFE

Activates and deactivates the Main Zone audio output connector labeled LFE when a custom speaker setup is selected.

When a custom speaker setup is selected:

•Select ON to activate the LFE output connector. LFE information is sent to the LFE output connector.

•Select OFF to deactivate the LFE output connector. LFE signals are redirected to the SUBWOOFER L/R output connectors. If the SUB L/R parameter is set to OFF, LFE signals are redirected to the speakers with the lowest crossover point.

3-30