2. GETTING STARTED
2.1Baby unit power supply
DC JACK
DC PLUG
1.Insert the small plug of the power adapter into the side of the baby unit.
2.Connect the other end of the power adapter to the mains socket.
NOTE
Only use the provided power adapter.
2.2Parent unit battery installation
The parent unit comes with a battery pack. Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low.
Battery JACK
Battery PLUG
1.Turn the belt clip so that it is in the hanging position.
2.Slide off the battery compartment cover.
3.Insert the battery plug of the supplied battery pack into the battery jack inside the compartment.
4.Reattach the battery compartment cover.
GETTING STARTED | 7 |
|
|