Rear
Item Description
Sensor ports (4) Used for connecting APC sensors, third-party dry-contact sensors, and standard third-party 0-5 V sensors. Third-party dry-contact state sensors require the NetBotz Dry Contact Cable (NBES0304). Standard third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable (NBES0305).
10/100 Base-T Provides for a 10/100 Base-T network connection and power through
network port Power-over-Ethernet (PoE). (The appliance operates at 100 Base-T only.)
| Status and link LEDs indicate network traffic: |
| • Status LED—blinks orange and green at start-up; indicates the status of |
| the network connection (solid green—IP address established; blinking |
| green—attempting to obtain an IP address). |
| • Link LED—blinks to indicate network traffic (green—connected at 10 |
| Mbps; orange—connected at 100 Mbps). |
USB port | Used to configure the appliance. |
Reset | Used to restart the appliance. |
NetBotz 355 Installation and Quick Configuration Manual | 5 |
