Fisher-Price T3640 manual Problems & Solutions, Problem Solution

Problems & Solutions

Problem

Solution

You hear static or buzzing

Receiver is out of range of transmitter. Move receiver closer to transmitter.

Note: Range varies depending on surrounding conditions such as noise

levels, physical obstructions and signal interference.

Transmitter power is off. Turn transmitter power on.

Channel switches are on different channels. Make sure channel switches

on both transmitter and receiver are set to same channel.

Loose power cord connection and transmitter power is off. Check

transmitter power cord plug-to-outlet connection.

No power to wall outlet and transmitter power is off. Make sure light

switch that controls power flow to wall outlet is on.

Power is off because circuit breaker for room is off. Make sure house

fuses and circuit breakers are on.

Receiver power/low battery

Receiver power is off. Turn receiver power on.

indicator does not light

Batteries in receiver are weak or dead. Replace the batteries with three,

alkaline “AAA” (LR03) batteries or use AC adaptor as power source.

Power is off because circuit breaker for room is off. Make sure house

fuses and circuit breakers are on.

No power to wall outlet and power is off. Make sure light switch that

controls power flow to wall outlet is on.

Receiver power/low battery

Batteries in receiver are weak or dead. Replace all batteries with three,

indicator turns orange

alkaline “AAA” (LR03) batteries or use AC adaptor as power source.

Transmitter power indicator does

Transmitter power is off. Turn transmitter power on.

not light

Loose power cord connection and transmitter power is off. Check

transmitter power cord plug-to-outlet connection.

No power to wall outlet and transmitter power is off. Make sure light

switch that controls power flow to wall outlet is on.

Power is off because circuit breaker for baby’s room is off. Make sure

house fuses and circuit breakers are on.

You can hear conversations or

There is signal interference due to other nursery monitors on same

sounds from other homes

channel or cordless telephone use. Change channel switches on both

transmitter and receiver to eliminate source of interference.