Fisher-Price T4839 manual Side View

Page 10

Testing Sound Reception

Power/Volume Dial

Sound Lights

Channel

Range Switch

Indicator

SIDE VIEW

Place a receiver in the room where you intend to use it.

Set the receiver channel switch to the same channel as the transmitter.

Turn the power/volume dial to turn the power ON. Wait a few seconds to see if you have a good signal. If the range indicator light blinks along with beeping, you are out of range. Move the receiver closer to the transmitter.

When sound is picked up by the receiver, the sound lights turn on.

-One or two lights indicate quieter sounds.

-Three or more lights indicate louder sounds.

If the range indicator begins fl ashing, you may be experiencing interference. Try selecting a different channel on both the receiver and transmitter. If the range indicator continues to fl ash, move the receiver closer to the transmitter.

10

Image 10
Contents T4839 Page For proper setup and use, please read these instructions Never use extension cords with the AC adaptorsT4839a-0920 Transmitter FeaturesReceiver Sound Lights Watch these lights to see baby’s sounds Receiver Battery Installation Optional Battery Safety Information Transmitter Battery ReplacementTesting Sound Reception SwitchSide View Receiver Battery Indicator Setup and UseClock Nap Timer Clock Set Turn receiver power on Button to scroll through minute choicesNightlight Timer Switch Nightlighti li ButtonSetup and Use Power source Problems & SolutionsReceiver screen is fading Monitor Monitor Model Number T4839East Aurora, New York 14052, U.S.A ICES-003 ICES-003 NMB-003Care NMB-003