Slide “Volume Switch” to adjust the volume of the receiver.
2. Channel selection
Press “CH button” to select the desired channel.
3. Channel Looping
Hold the “CH button” for three seconds to enter the loop mode. All the available channels will be displayed one by one (default interval is 5 seconds).
4. Sleep Mode
Press the “Sleep Button” to shut down the LCD display and keep the voice function. Press the button again and recall the normal working mode. This can save energy.
5. Eliminate Alarm button
Press “Eliminate Alarm” button to stop alarm voice. Within 1 minute, the alarm enters the next circle automatically.
5. Specifications
| Item | Value |
|
|
|
| Transmission Frequency | ISM 2,400~2,483 MHz |
|
|
|
| Transmission Power | 10mW/CE; 2mW/FCC |
|
|
|
| Operating Frequency | 2414MHz;2432MHz;2450MHz;2468MHz |
GENERAL |
|
|
Unobstructed Effective Range | 100m (328ft)(Min.) | |
|
|
|
| Modulation Mode | FM |
|
|
|
| Operating Temperature | |
|
|
|
| Operating Humidity | ≤85%RH |
|
|
|