8657 Baby Monitor 150 UG [Vtech 2] 27/5/08 13:03 Page 16
BT Baby Monitor 150 VTECH – Issue 2 – 27.05.08 – 8796
16 Using your BT Baby Monitor 150
Paging
You can use the button on the Baby unit to find the Parent unit. This will also reset the speaker volume level, in case it has been switched off.
1.Press 
on the Baby unit. If the Parent unit volume was set to off, this will automatically reset the volume to the default volume. The paging alert will sound.
2.To stop the Page alert, press any button on the Parent unit, or
press 
again on the Baby unit. If no button is pressed, the paging tone will stop after 2 minutes.
The Parent unit menu
The 
button on your Parent unit can be used to select and change the settings on the Baby unit without having to risk disturbing your baby.
You can access the settings by:
1.Press 
then 
or 
to scroll through the options.
Then press 
to confirm your choice.
2.Pressing 
again will exit the current menu option or the unit will return to idle.
If you experience any problems, please call the Helpline on 0808 100 6554*