Connecting to a Preexisting Network
Add an AirStation without changing your existing LAN configuration
1.Set the AirStation into Access Point Mode by moving the Router switch from ON to OFF.
2.Connect one of the AirStation’s LAN ports to an existing router or switch on your network. Nothing should be plugged into the WAN (“Internet”) port.
3.Open LAN Settings - LAN Port Settings and configure the following settings:
IP Address =[192.168.11.137] (Specify an unused network address from the existing LAN.)
Subnet Mask=[255.255.255.0] (Use the same Subnet Mask as the existing LAN.) DHCP Server Function=[Disable]
4.Restart PC.
22