UseUse
To Fold for Portability
9 | Carry Straps |
|
7
Frame
GrooveGroove
Base Wire
•Grasp both sides of a base wire.
•While lifting the product up slightly, pull both sides of the base wire outward to remove the base wire from the groove in each frame.
• Fasten the carry straps.
Care
8
Base Wire
Correct
The pad is machine washable.Wash the pad separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. The fabric, frame and toys may be wiped clean using a mild cleaning solution and a damp cloth.
•Rotate the base wire up.
•Repeat this procedure to fold the other base wire.
If you have any questions about this product:
In CANADA: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. Questions?
In GREAT BRITAIN: Mattel U.K., Ltd., Helpline: 01628 500302.
In AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service
79534 B | |
©1998 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. | Printed in Hong Kong |