Fisher-Price M6711 manual Parts, Assembly

IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad.

2 Swing Frames

IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or bro- ken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.

Hint: To allow the product to swing properly, the swing arm-to-frame (with power switch) connection is designed to be loose.

Toy Bar

Seat Pad

Seat Frame

2 Toys

2 Base Tubes

#6 x 2,5 cm Screw – 2

Shown Actual Size

Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws.

1

•Slide the front and back legs on the swing frame out until they “click” into place.

•Repeat this procedure to open the other swing frame.

Press Buttons on Front Legs

Base Tube

2

•While pressing the buttons on each front leg, insert the front legs into the base tube.

•Push the front legs down into the base tube until the buttons “click” into place.