To Sterilize
•CHECK THAT YOU HAVE ADDED THE CORRECT AMOUNT OF WATER
(7 fl. oz.) Failure to add enough water may cause damage to this product and/or your microwave. Adding too much water may mean your items are not properly sterilized.
•Clip the lid on using the side catches and place into microwave.
•See TABLE A for microwave wattage and timings. Do not exceed these times.
IMPORTANT: WAIT AT LEAST TWO MINUTES BEFORE REMOVING STERILIZER FROM MICROWAVE. This will complete the sterilization cycle and allow the unit to cool slightly.
•After the unit has cooled, the lid can be easily removed by unclipping the side catches one at a time.
•After each cycle, drain the excess water from the unit and rinse to prevent limescale
•Items will remain sterile in the sterilizer for up to three hours providing the lid is not removed.
•The Munchkin Steam Guard™ Sterilizer is dishwasher safe. Food colorings may discolor components.
TABLE A
ALWAYS ADD 7 FL. OZ. OF WATER (PREFERABLY DISTILLED*)
WATTAGE | FULL POWER | COOLING TIME | |
|
|
| |
1100 – 1850W | 2 min | 2 min | |
|
|
|
|
850 | – 1000W | 4 min | 2 min |
500 | – 800W | 6 min | 2 min |
|
|
|
|
*Distilled water reduces mineral deposits.
To clean sterilizer unit
• Lid, tray, tongs and base are
4