Folding Playard

Figure 7

Figure 8

Figure 9

Figure 10

To operate the brakes on the wheels, press downward on the brake lever as shown in figure 11. To release, lift upward on the lever.

1. Undo the 6 Velcro straps holding mattress from underneath Playard floor. (If mattress is not used in the bassinet). Remove mattress and set aside.

2. Grasp the center floor lock handle pushing down . Rotate the handle counter-clockwise about 90 degrees and lift upward until handle is as high as the top rails. Gather the four feet of the playard together so that they nearly touch each other. See figure 1 and 2.

NOTE: TOP RAILS OF THE PLAYARD ARE STILL IN THE “LOCKED” POSITION.

3. Locate release button on the center of the bottom of each top rail. Lift slightly while squeezing button until the rail clicks. Push down on rail (while still holding release button in) until side forms a “U”. Repeat for remaining sides (Fig. 3).

NOTE: If top rail(s) do not form the “U” completely do not force. Check the floor of your Playard to make sure all bottom rails are unlocked and pull up on middle handle of floor again. Repeat step 3.

4. Pull up on handle in center of Playard (Fig. 4). Gather legs of Playard together.

5. Wrap mattress around Playard frame with padded side facing in.

6.Secure the 3 Velcro straps by feeding through loops on end of mattress and folding back onto itself (Fig. 5).

7.Place Playard in carry bag so handle comes through opening

between zippers and wheels come through opening in the end of bag.

WARNING: NEVER LEAVE
INFANT IN PRODUCT WITH SIDES
DOWN. Infant may roll into space be-
tween pad and loose mesh side causing
suffocation.	Figure 4

Figure 11

Figure 1

Figure 2

Figure 3

Figure 5