1 Press 
MENU.
2 Select [Features] > [Sleeptimer] .
ÈThe [Sleeptimer] menu appears.
3 Press 
to set the sleep time.
ÈThe sleeptimer can be up to 180 minutes in steps of five minutes. If set to zero minutes, the sleeptimer is switched off.
4 Press OK to activate the sleeptimer.
ÈThe TV switches to standby after the
Automatically switch the TV on (on timer)
You can switch the TV to a specified channel at a specified time, from standby.
1 Press 
MENU.
2 Select [Features] > [On timer] .
3 Press 
to enter the [On timer] menu.
4 Press 
to select [Activate] and set a day of the week or frequency.
5 Press OK to confirm.
6 Press 
to select [Time] and set the starting time.
7 Press [Done] to confirm.
8 Press 
to select [Programme no.] and set the channel.
9 Press OK to confirm.
10 Press 
MENU to exit.
Tip
•Select [On timer] > [Activate] > [Off] to disable [On timer].
•When [On timer] is [Off], only [Activate] can be selected.
•Set the TV clock before activating [On timer]feature (see ‘Set the TV clock’ on page 16).
Use child control and rating locks
You can prevent your children from watching certain programmes or certain channels by locking the TV controls and by using ratings.
Set or change the TV lock code
1 Press 
MENU.
2 Press 
to select [Features] > [Set code].
3 Press 
to enter the code setup.
4 Enter your code using the Numeric buttons.
5
ÈIf the code is set successfully, the dialogue box will disappear. However, if the code cannot be set, a new dialogue box will prompt you to
6 If you want to change the code, select [Features] > [Change code].
7 Enter your current code using the Numeric buttons.
ÈIf the code is validated, a new dialogue box will prompt you to enter your new code.
8 Enter the new code using the Numeric buttons.
ÈA message appears prompting you to enter the new code again for confirmation.
Tip
•If you forget your code, enter ‘8888’ to override any existing codes.
E n g l i s h
Downloaded From | EN 15 |