Philips M2926A, M2925A Specifications, Monitor M2922A, Transducers, Remote Event Marker 15249A

Specifications

Monitor (M2922A)

Federal Law restricts this device to use by or on the order of a physician.1

Standards Compliance

The FM-2 Portable Antepartum Fetal Monitor complies with the requirements of the Medical Device Directive 93/42/EEC and the following safety standards:

•EN60601-1/IEC60601-1, EN60601-1-1, EN60101-2-37

•IEC 1157

•IEC 60601-1

•UL2601-1

•CAN/CSA C22.2#601.1-M90

Class II equipment, double insulated

Continuous operation

Parameter		Input	Resulting
	Connector		Isolation
US		BF	BF
Toco		BF	BF
Electromagnetic Compatibility
Complies with EN60601-1-2
Environmental
Operating Temp:		-10oC to 45oC
		(50oF to 110oF)
Storage Temp:		-20oC to 60oC
		(-29oF to 175oF)
Relative Humidity:		20% to 90% non
		condensing
Altitude:		0-3048m (10,000 ft)
Dimensions
Height:		15.24 cm (6.0 inches)
Width:		26.4 cm (10.4 inches)
Depth:		13.7 cm (5.4 inches)
Weight:		2.27 kg (5lb)
Power - Battery
Type:		Lead acid, rechargeable.
Operation:		minimum 2-hours fully
		charged at 10oC, longer
		at higher temperature.
Recharge during		Maximum 14 hours full
monitoring:		recharge during monitor-
		ing (typical 11 hours).

Recharge without	Maximum 8 hours to
monitoring:	full recharge when no
	monitoring occurs (typical
	4.75 hours).
Low power warning: Approximately 30 minutes
	at 25oC.
Power - External Power Supply
AC-powered	110-120V~, 50-60Hz,
	0.15A
	or
	220-240V~, 50-60Hz,
	0.08A
Display
Backlight:	Cold cathode fluorescent
Active area:	3.78” x 2.83”
	(320 x 240 dots)
Resolution:	85 dots per inch
Contrast:	10:1
Ultrasound
Isata:	< 4mW
BPM range:
Paper scale:	USA paper: 30-240 BPM,
	International Paper: 50-210
	BPM.
Ultrasound
processing range:	50-240 BPM.
Accuracy:	± 1% ± 1 BPM.
Leakage current:	≤ 10 ∝ A @ 264 VAC applied
	to transducer.
Isolation:	>4 kV RMS, Type BF
	applied part.
Toco
Range:	0-100 relative units
Resolution:	1 count
Accuracy:	± 1% ± 1 relative unit
Leakage:	≤ 10 ∝ A @ 264 VAC applied
	to transducer
Isolation:	>4 kV RMS, Type BF
	applied part

Transducers

Doppler Ultrasound FHR (M1356A)

Weight:	185 g (6.5 oz)
Cable length:	2.5m (8ft 2in)
Diameter:	75mm (2.95in)
Latex free

External Toco (M1355A)

Transducer Weight: 180 g (6.3 oz)

Cable length: 2.5m (8ft 2in)

Diameter: 75mm (2.95in)

Latex free

Remote Event Marker (15249A)

1.USA only Length: 2.8m (9ft 2in)

4