Philips SBC SC369 warranty Baby unit, Small Parent unit, Big Parent unit, Problem Solving

Page 5

PROBLEM SOLVING

Problem

Possible Cause

Solution

 

 

 

Power light does not light

Unit is not turned on.

Turn Volume control/Off switch

(Parent unit).

 

clockwise (B-4, C-4).

 

Batteries are low.

Recharge batteries.

 

 

 

Power light does not light

Unit is not turned on.

Push the Power switch (A-4) to

(Baby unit).

 

switch on the unit.

 

AC adapter is not plugged in or

Plug in AC adapter or replace

 

Batteries are exhausted.

batteries.

 

AC adapter plugged into an

If the power socket has a switch,

 

outlet that is not working.

turn it on.

 

 

 

High pitched noise.

Units are too close together.

Move Parent unit away from

 

 

Baby unit.

 

Volume too high.

Turn volume control on Parent

 

 

unit counter-clockwise.

 

 

 

Parent unit batteries do not

Battery life is at an end.

Replace rechargeable battery

charge.

 

pack.

 

 

 

No sound.

Volume control on Parent unit is

Turn volume control/Off switch

 

set too low.

clockwise (B-4, C-4).

 

Units are out of range.

Move Parent unit closer to Baby

 

 

unit.

 

 

 

Power light blinking.

Batteries are low or empty.

Parent unit:- recharge batteries.

 

 

Baby unit:- replace batteries or

 

 

connect to mains power.

 

 

 

Interference or poor

Mobile or cordless phones too

Move the phones away from the

reception.

close to the baby monitor can

units.

 

cause interference.

 

 

 

 

Receiving signals from a

Both systems are using the same

Switch channels.

different baby monitor.

frequencies

 

 

 

 

System check light flashing/

Units are out of range or there is

Move parent units closer to baby

system check alarm activated

interference from another FM

unit to restore the link. Remove

 

source

the other FM source.

 

 

 

GETTING THE UNITS READY FOR USE

Baby unit

Connect the AC power adapter (A-9) to an AC mains socket, and then connect the cord to the DC power supply socket (A-5) of the Baby unit.

If you want to use batteries, remove the battery compartment cover (A-7) using a screwdriver. Insert four 1.5V, AA batteries (not included; we recommend non-chargeable Philips Alkaline batteries), noting the + and - configuration inside the battery compartment. Put the cover back in place and tighten screw.

The Baby unit operates cordlessly for up to 30 hours on fresh batteries. The red POWER light (A-2) flashes when battery power is low. If this happens install new batteries.

Note: To switch off the Baby unit completely push the POWER button (A-4) .

Small Parent unit

The small Parent unit uses a rechargeable battery pack. This is already installed, but first it must be charged for at least 14 hours as follows before using the unit outside the charging base:

Connect the AC power adapter (B-11) to an AC mains socket, and then connect the cord to the DC power supply socket (B-10) of the charging base (B-6).

Place the small Parent unit inside the charging base. The red charging light (B-13) lights.

The small Parent unit can be operated now but you should leave it in the charging base until the batteries are fully charged (at least 14 hours). When the batteries are fully charged, take the small Parent unit out of the charging base and use cordlessly for up to 12 hours.

When the red POWER light (B-2) on the small Parent unit flashes, the battery power is low. Place the small Parent unit inside the charging base to recharge the batteries.

Big Parent unit

Connect the AC power adapter (C-9) to an AC mains socket, and then connect the cord to the DC power supply socket (C-8) of the big parent unit.

If you want to use batteries, remove the battery compartment cover (C-6) using a screwdriver. Insert four 1.5V, AA batteries (not included; we recommend non-chargeable Philips Alkaline batteries), noting the + and - configuration inside the battery compartment. Put the cover back in place and tighten screw.

The big Parent unit operates cordlessly for up to 30 hours on fresh batteries. The red POWER light (C-1) flashes when battery power is low. If this happens install new batteries.

8

5

IFUSC369ENbk.p65

5

14/10/2002, 11:29

Image 5
Contents 0682 IFUSC369ENbk.p65 14/10/2002 Small Parent Unit Baby UnitBIG Parent Unit Technical SpecificationsBaby unit Problem SolvingSmall Parent unit Big Parent unitFinder feature Switching on the audible warningMonitoring baby’s sounds Avoiding interference
Related manuals
Manual 6 pages 7.19 Kb

SBC SC369 specifications

The Philips SBC SC369 is a remarkable headset that embodies innovative design and functionality, catering to both casual listeners and audiophiles alike. This sleek model showcases Philips' commitment to producing high-quality audio devices that blend style, comfort, and performance seamlessly.

One of the standout features of the SBC SC369 is its exceptional sound quality. Equipped with advanced drivers, it delivers clear and balanced audio across a wide frequency range. Whether you're listening to music, taking calls, or enjoying podcasts, this headset ensures an immersive audio experience. The bass response is particularly noteworthy, offering deep and rich lows that enhance your listening pleasure without overwhelming the mids and highs.

Comfort is another core aspect of the SBC SC369. Designed with soft ear cushions and an adjustable headband, it provides a snug fit that can be worn for extended periods without discomfort. The lightweight construction also contributes to a more enjoyable listening experience, making it ideal for daily commutes, workouts, or relaxing at home.

The Philips SBC SC369 employs the latest technologies to enhance usability. It features a built-in microphone that allows for hands-free calling, ensuring clarity during conversations. The headset includes intuitive controls for playback and volume adjustment, making it easy to navigate your audio without needing to reach for your device. This level of convenience is particularly beneficial for users on the go.

In terms of connectivity, the SBC SC369 offers versatile options. It is compatible with various devices, including smartphones, tablets, and computers, via a universal 3.5mm audio jack. This ensures that users can easily connect their headset regardless of the device they are using.

Durability is also a key characteristic of the SBC SC369. Constructed with high-quality materials, it is designed to withstand the rigors of daily use. This durability, combined with its stylish design, makes it a perfect accessory for any audio enthusiast.

Overall, the Philips SBC SC369 is an impressive combination of sound quality, comfort, convenience, and durability. Whether for casual use or serious listening, this headset meets the demands of modern users, making it a strong contender in the competitive audio market.