Freshtel manual Configure the SPA-2000 to connect to the Firefly Network

Dial 110# to hear the SPA-2000's current IP address. If this is not the same as what you entered in, please repeat steps 1 through 9 to ensure that the settings are correct.

Step 3: Configure the SPA-2000 to connect to the Firefly Network

1.Open your configuration page. To do so, type the following into your web browser: http://xxx.xxx.xxx.xxx/admin/advanced

( "xxx.xxx.xxx.xxx" represents the IP address of your SPA-2000)

2.Click on the Provisioning menu

3.In the text box marked Profile Rule enter one of the following addresses, based on your location. If you have configured a local dialing prefix for your account via the Freshtel website, use one of the Local Prefix addresses; otherwise, use one of the other addresses. Each of these configuration files has been modified to provide the correct settings for your local country.

(NOTE the underscores in “sipura_spa-2000” and “initial_xx” – to be sure, copy and paste the appropriate line into the Profile Rule field instead of typing it).

Local Prefix

Australia: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_au_local.cfg

USA: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_us_local.cfg

UK: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_uk_local.cfg

No Local Prefix

Australia: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_au.cfg

USA: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_us.cfg

UK: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial_uk.cfg

All Other: http://www.freshtel.net/support/hardware/sipura_spa-2000/initial.cfg

4.Click on the Submit All Changes button and close your web browser.

Step 4: Updating to the latest firmware and configuring your Firefly number and password

1.Once the ATA has applied the changes, browse to the following address to instruct the ATA to upgrade its firmware. Eg, for an IP address of xxx.xxx.xxx.xxx:

http://xxx.xxx.xxx.xxx/admin/upgrade?http://www.freshtel.net/support/hardware/sipura_spa-2000/firmware.bin

(NOTE the underscore in “sipura_spa-2000” – to be sure, copy and paste the above line into your browser)