Combi Baby Carrier instruction manual Remove Fabric and Plastic Covers, Remove Screw and Washer

For questions concerning installation please see our instructional video at the following link: www.combi-intl.com/retrofit_kit.html

Wrench Tool

SpringSpring

	Inspection
	Sticker
*Phillips-head screwdriver	*Color of spring may vary.
not included.

*Make sure you have all the parts pictured above before using your child restraint. If any parts are missing, call Consumer Affairs at 1-800-992-6624.

Step 1: Remove Fabric and Plastic Covers

1a.

Detach foot-end of fabric cover from shell by unsnapping and removing adjuster strap and buckle from cover. Fold cover back as shown in figure 1b to expose the plastic covers on the left and right.

1b.

Right

Left

Retrofit Kit Instruction Manual

Models Affected

Combi Centre, Centre ARB, Shuttle and associated Travel Systems con- taining the Centre and Shuttle.

Model numbers affected are: 8065, 8074, 8086, 8087 and 8520 and associated Travel Systems containing the Centre and Shuttle (Model #4400, 4515, 4520)

Child restraints manufactured prior to 12/15/2007 are affected by this recall.

Step 2: Remove Screw and Washer

3a.

While holding back plastic cover,

use phillips-head screwdriver to remove screw and washer as shown in figure 3b.

3b.

Step 3: Assemble Spring

2.

4.

Slide wrench tool under-	Place screw and washer
neath lower end of plastic		-1-
cover to pop open.	into spring loop.