Quinny Cv217 manual Removing or Reversing Seat, Seat Adapters

TM

To Use

8Removing or Reversing

Seat

It is necessary to remove seat from frame when preparing to use the car seat adapters.

Locate grey tab behind seat (Figure 8).

Rotate release tab outward, then squeeze recline button in all the way (Figure 8).

While squeezing recline button in and while tab is rotated out, lift seat off frame (Figure 8a).

Tip: Place free hand on side of seat close to hub to easily lift off seat frame.

Reverse direction of seat and evenly place seat onto seat adapters (Figure 8b).

8

1

2

8a

3

8b

9Seat Adapters

NOTE: Seat adapters are preassembled on frame and must always be in place to attach seat. Seat adapters should only be removed when using the infant car seat adapters.

To remove adapters, swivel grey tabs and slide adapters off (Figures 9-9a).

To reattach seat adapters, open stroller frame, lift up on grey tab to expose slots, align slots with frame, slide adapters in and push down on grey tabs (Figures 9-9a).

NOTES: Seat adapter labeled 1 fits into frame hub labeled 1. Seat adapter labeled 2 fits into frame hub labeled

2. Numbered adapters and frame hubs match up only when frame is in the open and in-use position.

9

1

9a

Grey

Tab2

4

7