Installing the Parent Organizer
•Separate the hook & loop attachments in the open slot of the Organizer.
•Orient the Organizer so that the cup holder is facing toward the front of the Caboose. See Figure 31.
•Stretch the Organizer outward and slide it down over the handlebar until it just comes into contact with the red trigger releases.
•Press the hook & loop attachments together
to secure it in place. | Figure 31 |
|
!WARNING
For use ONLY on the Joovy Caboose
Maximum weight for Organizer is 5 lbs.
Maintenance
All of the fittings, snaps, locks, rivets, and other hardware and plastic parts on the stroller should be inspected periodically to ensure that they are secured properly and not damaged or malfunctioning. The seat belts and safety harnesses, as well as all other straps and fabric items and their stitching should also be inspected periodically to ensure that they are secured properly and not loose, torn or otherwise damaged. All moving parts, such as wheels, brakes, and hinges should also be checked periodically to ensure they are operating properly.
Any missing, broken, or worn components should be replaced immediately, and the stroller should not be used until they are replaced. Only original manufacturer’s components should be used. If needed, please contact Joovy at our
Fabric fading may occur if the stroller is left in direct sunlight for long periods of time. When not in use, store the stroller out of direct sun.
Cleaning
The fabric material on this stroller can be cleaned using mild household soap or detergent and warm water on a sponge or clean cloth. Always allow the fabric to completely air dry before using the stroller.
The frame and wheels should always be kept clean and free of dirt and foreign matter, especially after operating the stroller in rain, snow, or other harsh environments. Use a sponge or cloth dampened with warm water and a mild household soap or detergent to clean the wheels after
such use.
Caboose Ultralight Instruction Manual | Page 14 |