STEP #5 - Safety Harness Instructions
Open the buckle by depressing the tabs on the top and bottom simultaneously. Be sure to release both sides of the buckle.
Move the harness straps out of the way and place the child in the stroller.
Put the child's arms through the loops formed by the shoulder/lap straps so that harness lays over the child's shoulders.
Fasten the buckle by inserting the tabs from the shoulder/lap strap into the buckle until you hear an audible click confirming that the buckle is secured.
The tops of the shoulder straps should be parallel to or higher than the shoulders of the child. If they are not, remove the shoulder from the anchor strap and refasten to the anchor strap that allows you to achieve the desired position of the shoulder strap.
If the child is too large for the straps to be adjusted properly do not use this stroller.
Caution: Make sure both shoulder straps are the same length.
STEP #6 - How to fold the Giant PreRunner Jog Stroller
Push the safety button and pull the folding triggers on both sides of frame then push down. The stroller can be to fold simply.
Use the fabric handle found between seat and footrest, which can be used to carry the stroller for a short distance.
To unfold, lift the stroller by handlebar, and the stroller should unfold automatically. Be sure the post inside the folding hinge is locked into the frame tubing and the safety button on the folding trigger is extended.
STEP #7 - How to use the Giant PreRunner Jog Stroller braking system
Your Giant PreRunner stroller uses a braking system similar to a bicycle. There is a brake lever at the handlebar that is connected to a brake mechanism at the front wheel.
Squeeze the brake lever to make sure that it moves freely, but does not bottom out against the handlebar.
Before using the stroller with a child test the brake and make sure that you can cause the front wheel to seize using the brake lever.
If not, use the barrel adjusters at the brake lever and the brake mechanism on the front wheel to adjust the cable tension until the brake works to your satisfaction.
The brake lever can also function as a parking brake. To engage the parking brake squeeze the brake lever and depress the button on the brake lever body until it engages. To deactivate, squeeze the brake lever until the parking brake button pops out.
WARNING! Do not attempt to use the parking brake on a hill!
Do not leave a child unattended in the stroller even if the parking brake is engaged!
You're should now be ready to use.
Copyright 2004 GIANT Bicycle Inc. all rights reserved 1/2004