Using the Travel System
Note: Ensure the Travel System Guardrail is attached in the proper direction.
CAUTION
Pull on each side of the Travel System
Guardrail to make sure that it is secure.
ATTACHING THE Travel System Guardrail
1.After removing the Guardrail, attach the Travel System Guardrail by slipping it over the armrest pins until you hear click into position. Gently tug the side, to be sure it is secure.
2.Recline the backrest to the middle or lower position.
3.Lock the “V” slot of the Combi Infant Car Seat / Carrier over the Travel System Guardrail.
4.Rotate until the foot end of Combi Infant Car Seat / Carrier locks into the Infant Car Seat / Carrier Locks located on each side of the handle. Push down on the foot end of the seat to ensure engagement.
5.Be certain that the Combi Infant Car Seat / Carrier is securely attached to the stroller by lifting up on the handle Combi Infant Car Seat / Carrier.
Infant Car Seat / Carrier Lock