Assembling the Stroller
1.Remove stroller and rear wheel assemblies from the plastic bag
2. Remove canopy by detaching rubber bands.
3.Remove front wheel assemblies, guardrail and stroller handle from inside the stroller.
4. Lift locking lever from stroller frame and open stroller.
5.Grasp right and left steel tubes and snap the stroller away from you to open.
6. Insert stroller handle into frame by pressing chrome buttons into the back of the stroller frame.
7.Insert long grey tabs into grey plastic slots on the stroller frame. Grey tabs must be
fully inserted into the slots in order to fold 
the stroller.
Attaching & Removing the Front Swivel Wheels
1.Turn stroller over and remove packaging material from stroller frame.
2.Insert the front wheels onto the stroller leg. Make sure the swivel wheel lever is behind the stroller leg and released. You will hear a click when the wheel is properly attached.
Removing the Swivel Wheels
Press in the square button located at the bottom of the wheel holder while pulling the assembly off of the swivel shaft.
Release Button
- 3 -