InStep M3 Check fasteners, To clean seat and canopy, To clean frame, To adjust handle height

Page 6

To adjust handle height:

While pushing the handle buttons in rotate handle to the desired height (Figure L).

Fig. L

Care and Maintenance

Check fasteners

After one hour of use, check all fasteners to make sure they are secure. Adjust if necessary. Periodically check the stroller and fasteners to ensure that it is in good operating condition.

To clean seat and canopy:

If light cleaning is required, use a soft cloth with warm water and mild soap, then air dry. Do not put into washing machine. Do not put in dryer. DO NOT BLEACH.

To clean frame:

Wipe using a soft cloth with warm water and mild soap. Air dry. DO NOT USE polish or abrasives. If you have any questions concerning the safe use of this product, please contact Pacific Cycle LLC before using:

and Schwinn are registered trademarks of

Pacific Cycle LLC. Please direct all inquiries to:

TEL 1-800-242-6110

FAX 1-800-858-2800

SCHWINN or InSTEP stroller questions can also be directed to: www.instep.net or info@instep.net

Image 6
Contents M3 Strollers Model M3 Strollers Assembly Instructions Stroller Assembly InstructionsFront Wheel Assembly Adjusting the front side pull caliper brakeInstalling Parent’s Convenience Tray Installing optional Child Tray sold separatelyInstalling optional Child booty cover sold separately To engage rear brakes Use InstructionsTo fold stroller To recline seatTo adjust handle height To clean seat and canopyTo clean frame Check fasteners