Century PM-1026AB manual Harness Tie Piece available on some models, Adjustable Handle

OPERATIONS and ADJUSTMENTS

1Harness Tie:

2-Piece (available on some models):

•To open: Squeeze tabs and pull apart.

•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.

1-Piece:

•To open: Unhook harness tie from child’s left side (fig. a) of harness strap.

•To close: From backside of harness tie, slide harness strap over harness tie tongue.

2Adjustable Handle:

•Handle has four adjustment positions.

•Push in red buttons on each side of handle, rotate and release red buttons. Continue rotating handle to desired position until you hear a “click” sound.

•IMPORTANT: Before lifting car seat, place handle in “locked” upright carrying position.

3Buckle:

3-Point Models

•To buckle: Push buckle down on tongue. Pull up on buckle to be sure it is locked.

•To unbuckle: Press red button and pull buckle off tongue.

5-Point Models

•To buckle: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.

•To unbuckle: Press red button and pull harness tongues out of buckle.

4Removing Car Seat from Base:

•Place handle in “locked” upright carrying position.

•Squeeze red release lever in base (fig. b).

•Lift car seat out of base.

5Adjustable Base (available on some models):

•Pull blue adjustment Handle out (fig. c).

•Adjust Foot to desired position.

•Release adjustment handle. Be sure it retracts into slot.

10