PARTS
Rear Axle | Front Wheels (x2) |
Stroller | Flat Bar | 1” Bar (x 2) |
|
| |
| ASSEMBLING |
|
TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY AND RETAIN THEM FOR FUTURE REFERENCE.
ASSEMBLY:
1.Remove stroller from box. NOTE: The front wheels, rear wheels, parent tray, and support bars specific to your infant car seats need to be installed prior to use.
2.To attach the front wheels, unfold stroller and lean backwards so that it rests on the handle and rear frame tubes with the front wheel tubes pointing upward. (Fig. 1) Position the front wheel assembly over the front tube so that the large hole in the swivel assembly will slide onto the front tube. Carefully push the wheel assembly until it locks onto the front leg. Tug on the wheel assembly to ensure that it is securely attached to the stroller. (Fig. 2)
3.Lean the stroller forward to rest on the front wheels. To attach the rear wheels, position the rear axle and wheel assembly so that the brake levers are facing the rear of the stroller. (Fig. 3.1) Press the rear wheel assembly onto the rear frame tubes, being careful that the push buttons on the forward side of each rear tube engage the hole on the forward side of each rear wheel housing. (Fig. 3.2) Tug on the rear wheel assembly to ensure that it is securely attached to the stroller and firmly locked into place.
DO NOT use the stroller if the wheels are not locked into place, but rather contact our customer service department immediately at (800)
| Push onto |
|
| bayonet |
|
| 1 | 2 |
Fig. 2 | Line up the frame tubes | slide onto frame tubes |
with the axleassembly | at the same time |
| 3 | 4 |
Fig. 1 | Push down until axle | Axle housing is secure when |
housing snaps into place | the metal tab locks axle | |
|
| housing into place |
Fig. 3 | 3 |
|
Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.