Raised Kickers
Reclining Seats
1To use the raised kicker, pull up on seat flap above the footplate, and remove the kicker stand from storage pocket. Attach the kicker stand to the seat with the hooks provided under seat flap.
2Attach kicker stand by wrapping both sides of the webbing under the footplate. Thread one side of the velcro webbing through the D ring of the other side, and secure velcro together.
3When not using the raised kicker, tuck the kick stand and the webbing straps into the pocket provided under the seat.
1 To recline: Pinch the clamp behind the seat, and slide it down to desired recline. Pull seat down on both sides to match recline position of clamp.
Basket
1 Remove child from stroller.
| From the front of the stroller: | |
| Remove lower seat fabric to | |
| expose bottom front portion | |
| of frame. Fasten basket Velcro | |
| around frame tubing on right | |
| side. Repeat on left side. | |
| ||
| once complete. | |
| 2 Tilt stroller back so the handle | |
| is flat on the floor. Fasten | |
| front middle snap of the | |
| basket around frame tubing | |
8 | under the footwell. Return | |
stroller to upright position. | ||
|
3From the rear of the stroller:
Fasten the top snaps of the basket around frame tubing above the middle support bar. Fasten the bottom snaps around the frame tubing above the middle support bar. Repeat on other side.
4Fasten the middle snap of the basket around center frame tubing, above the middle support bar.
•Weather Cover: If desired, pull weather cover down and over the seat back mesh. Secure firmly over both sides of seat. When not in use, roll weather cover up and fasten with elastic loop and barrel provided under top of the seat fabric.
Reverse steps to return to the upright position.
9