Preparing Your Site

NOTE: This device will only work with the ST12MHDDC HDMI Extender kit. Please review site preparation steps from the ST12MHDDC manual prior to installing additional Repeaters.

1.Determine where the Repeater/Display will be installed in relation to the ST12MHDDC HDMI Extender kit (sold separately) and place/mount the display appropriately.

2.(Optional) If using additional repeater unit(s) (sold separately), determine where the remote display(s) will be located in relation to this repeater/display and place/ mount the display(s) appropriately. Repeaters allow for an additional 330 ft. (100 meters) of Cat5/6 between each device. The Repeater(s) must be situated between the ST121MHDDC extender and the receiver, as the receiver portion does not have an RJ-45 out port to continue the chain.

NOTE: Ensure the Repeater Unit(s) are situated near an available AC electrical outlet. Make sure all devices are turned off before beginning installation.

Instruction Manual