Operating Instructions

Important: When using the wine cellar for the ﬁrst time, allow at least 48 hours for the internal temperature to adjust properly. Make sure there are at least 1 to 3 bottles in both chambers.

ALWAYS REMOVE ALL BOTTLES BEFORE MOVING THE WINE CELLAR.

Using your Wine Cellar

Place your wine cellar on a flat surface that is strong enough to support it when fully loaded.

Allow at least 3 inches between the rear of the unit and the wall.

Gently place/slide the racks in the wine cellar.

Plug the power cord into a standard electrical outlet and the unit will turn on automatically to the default setting.

Place bottles inside the cellar.

Determine the best setting to use: refer to the temperature guide for appropriate serving temperatures (see page 7).

The unit’s cooling system operates efficiently with an ambient temperature of less than 70°F (21°C).

Proper Air Circulation

To ensure that your wine cellar works at the maximum efficiency it was designed for, you should install it in a location where there is proper air circulation and electrical connections.

Allow 5 inches of space for the right side and 3 inches of space for both the left and rear sides of the wine cellar for proper ventilation.

To ensure proper internal air circulation, do not overfill your wine cellar.

This wine cellar is designed to be freestanding only, and should not be recessed or built in (fully recessed).

NOTE: Allow enough space in the front of the unit to open the door 120°.

Electrical Requirements

Do not plug unit into the same outlet as a refrigerator or microwave.

Make sure there is a suitable power outlet (120 volts, 15 amps) with proper grounding to power the wine cellar.

Avoid the use of three-prong plug adapters or cutting off the grounding prong in order to accommodate a two-plug outlet. This is a dangerous practice since it provides no effective grounding for the wine cellar and may result in a shock hazard.

Leveling your Wine Cellar

Your wine cellar has 4 leveling legs. After properly placing your wine cellar in its final position, you can level your wine cellar.

(Please note that the leg that stands on the hinge is the shorter leg.)

Leveling legs can be adjusted by turning them clockwise to raise the wine cellar or by turning them counterclockwise to lower the cellar.

Installation Limitations

Do not place heavy objects on top of the unit.

Do not locate the unit in a moist place or display in direct sunlight.

Do not place the unit next to a major appliance that emits large amounts of heat, such as a dishwasher, microwave, toaster oven, oven or barbecue, etc.

Do not install your wine cellar in any location not properly insulated or heated (garage, etc).

Select a suitable location for the wine cellar on a hard, level and even surface away from direct sunlight or heat source, e.g., radiators, baseboard heaters, cooking appliances, etc. Any surface unevenness should be corrected with the leveling legs located on the front and rear bottom corners of the wine cellar. Avoid placing unit where there may be electrical interference.

NOTE: To minimize the risk of rusting, leakage and insulation damage, avoid placing the unit in a place where heavy moisture is present.

Under no circumstances spill or directly apply water onto or into the unit.

Installing the Water Tray

The purpose of the water tray is to receive the condensation drained from the interior. The collected water will evaporate so there is no need to remove the water manually.

CWC-1200DZ, Dual Zone Private Reserve Wine Cellar specifications

The Cuisinart CWC-1200DZ Dual Zone Private Reserve Wine Cellar is an exceptional choice for wine enthusiasts seeking to preserve their valuable collection. Designed with a user-friendly interface and advanced technologies, this wine cellar offers the ideal environment for a variety of wines, ensuring that each bottle retains its unique flavor profile and characteristics.

One of the standout features of the CWC-1200DZ is its dual zone temperature control. This feature allows users to set two distinct temperature zones, making it perfect for storing both red and white wines at their optimal temperatures. The upper zone can be set between 54°F to 66°F, while the lower zone ranges from 46°F to 66°F. This versatility ensures that your wines are always ready to serve at the perfect temperature, enhancing the tasting experience.

The wine cellar is designed with a sleek, modern aesthetic that complements any space. Its sophisticated glass door not only showcases your collection but also features a UV filter that protects the wine from harmful light exposure. Moreover, the stainless steel accents add a touch of elegance, making it a stylish addition to your home, kitchen, or wine cellar.

Another noteworthy characteristic of the CWC-1200DZ is its adjustable wooden shelves. Built to accommodate various bottle sizes, these shelves can be rearranged to maximize space for your collection. The spacious design can hold up to 12 standard wine bottles, allowing for a diverse assortment of wines.

In addition to the practical features, this wine cellar is equipped with advanced cooling technologies. The thermoelectric cooling system operates quietly and efficiently, providing vibration-free operation that preserves the integrity of the wine. Additionally, the built-in circulation fans ensure consistent temperature and humidity levels throughout the cellar, creating an ideal aging environment.

The Cuisinart CWC-1200DZ also boasts a digital control panel with an easy-to-read LED display. This panel allows users to monitor and adjust temperature settings effortlessly. The interior lighting is also LED, offering an attractive way to highlight your collection without generating excess heat.

In summary, the Cuisinart CWC-1200DZ Dual Zone Private Reserve Wine Cellar combines functionality, style, and cutting-edge technology. Whether you are a seasoned collector or someone who simply enjoys a good bottle of wine, this wine cellar ensures that your collection remains in perfect condition, ready for any occasion.