Product Assembly, Assembly Instructions

zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.

•Do not use damaged batteries.

•Insert batteries with the correct polarity.

•Do not short-circuit the battery terminals.

•Remove exhausted batteries from the toy.

•Remove batteries during long periods of non-use.

•Do not dispose of batteries in fire.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the toy before charging (if removable).

•Rechargeable batteries are only to be charged under adult supervision.

Product Assembly

CAUTION: With the VTech® Sit-to-Race Smart

WheelsTM, safety comes first. To ensure your child’s safety, please

only assemble this product by an adult. This package contains four small screws. For your child’s safety, do not let your child play with the toy until it is fully assembled. Adult supervision required.

ASSEMBLY INSTRUCTIONS

1.To install the four wheels onto the body, first insert an axle through one wheel and one yellow cylinder. Please be sure the deeper hole in the wheel faces out, and the larger end of the yellow cylinder goes inside the body. Maneuver the cylinder until it locks into place.